ITGT-RTS65

Bluetest RTS65 The ultimate OTA system

Designed to Save Time

The RTS65 reverberation chamber is designed to optimize the time you spend on OTA measurements. Our development focus has been on increasing the productivity in your lab. We want your focus to be on the results, not the test equipment. We have developed a generation of RTS chambers that is an integrated system which will give every engineer the user experience they deserve. The latest addition to the RTS65 includes up to 16 sub-12 GHz measurement ports and innovative solutions supporting 5G measurements including directive and isotropic measurements in the 28 and 39 GHz (FR2) mmWave bands.

Multipath Environment - inherent MIMO and multi-carrier support

The RTS65 consists of a shielded reverberation chamber with reflecting walls. The device to be tested is placed on a turntable. The reflective walls in combination with moving reflectors (mode stirrers), and the turntable, create a Rayleigh faded rich isotropic multipath environment inside the chamber. We refer to this environment as “RIMP”. The multipath environment is enabled by default and moving from SISO to realistic evaluation of MIMO devices only requires a few more cables and a MIMO-enabled communication tester.
This environment is very well-suited for antenna and radio performance evaluation of modern multi-antenna (MIMO) devices such as WLAN, 4G and 5G. Bluetest’s vast experience in reverberation chamber technology development has resulted in a well-proven, highly accurate and robust OTA test system.

Bluetest Flow – the powerful Software Platform

The RTS65 comes with the measurement and analysis software platform: Bluetest Flow.

This integrated test environment offers new levels of functionality for testing complex wireless solutions.

All measurements are executed by the built-in Flow server. There is no need to be concerned about incompatible computers, missing drivers or conflicting software that cause time consuming trouble-shooting. The server hardware has been selected to handle all possible measurement with optimal performance and all measurement results are stored in a secure on-board data base.

Multipath Environment - inherent MIMO and multi-carrier support

The RTS65 consists of a shielded reverberation chamber with reflecting walls. The device to be tested is placed on a turntable. The reflective walls in combination with moving reflectors (mode stirrers), and the turntable, create a Rayleigh faded rich isotropic multipath environment inside the chamber. We refer to this environment as “RIMP”. The multipath environment is enabled by default and moving from SISO to realistic evaluation of MIMO devices only requires a few more cables and a MIMO-enabled communication tester.

This environment is very well-suited for antenna and radio performance evaluation of modern multi-antenna (MIMO) devices such as WLAN, 4G and 5G. Bluetest’s vast experience in reverberation chamber technology development has resulted in a well-proven, highly accurate and robust OTA test system.

Technical Specifications

General
Model name RTS65
Frequency range 650 MHz – 12 GHz (43.5 GHz w. 5G option)
Shielding >100 dB (Typ. >80 dB @ 43.5 GHz)
Power consumption Typical 250 W
Dimensions (mm) L 1945 x H 2000 x D 1430
Accuracy Passive measurements 0.3 dB (STD)
Accuracy TRP 0.3 dB (STD)
Accuracy TIS 0.5 dB (STD)
Repeatability 0.1 dB (STD)
Measurement antennas 650 MHz – 12 GHz: Up to 16
6–43.5 GHz: Up to 2
CATR option
Frequency range 24 GHz – 43.5 GHz
Quiet Zone Diameter 30 cm
Link loss (typ.) 28 GHz: 49 dB
39 GHz: 55 dB
Max DUT size (holder dependent) 1 kg, 24 cm longest side, 1 cm thickness
Supported communication testers Contact Bluetest for latest status

Reference

RTS65 OTA Test System

650MHz to 12GHz (43.5GHz)
Application: 2,3,4,5G,WiFi,Iot,Bluetooth...etc

Learn More >

RTS25 Wireless Test System

2.4–2.5 GHz, 5.0–6.0 GHz, 6.0–7.125 GHz
Application: WiFi,Iot,Bluetooth...etc

Learn More >

RTS95 Large device testing

Live person measurements
400 MHz – 12 GHz (43.5 GHz)

Learn More >